Back
FORMATION

E-learning: the basics of process FMEA according to the AIAG-VDA manual – #1189

Categories :
E-learning

Fiche

Access to this e-learning is available :

  • by purchasing access to the EURO-SYMBIOSE e-learning platform.
  • by exporting the sources to your own e-learning platform for permanent and universal access for all your staff.

Context

The “Process FMEA basics according to the AIAG-VDA manual” module is an e-learning course designed to help you discover the FMEA approach used in the automotive industry, as harmonised by the AIAG and the VDA.
You wish to :

  • Refresher courses for participants in process FMEA.
  • Refresher training for internal and 2nd party auditors, in accordance with requirements 7.2.3d) of IATF 16949: 2016.
  • Learn the basics of the AIAG-VDA process FMEA approach, so that you are better prepared for your next facilitator or project manager training course.

Objectives

In just 1 hour, the E-learning module “The basics of process FMEA according to the AIAG-VDA manual” enables learners to :

  • Understand the main changes, improvements and benefits compared with the 4th edition of the AIAG.
  • Understand the 7 steps of the AIAG-VDA approach.
  • Understand the “AP” risk prioritisation index, which replaces the IPR/RPN, enabling the need for action to be assessed at three levels: high, medium and low.

If the learner has no knowledge of the process FMEA, this e-learning course will enable them to acquire the basics needed to take part in a future process FMEA.

Recommanded for

Anyone wishing to acquire basic knowledge of process FMEA in accordance with the AIAG-VDA manual.

Prerequisites

No prerequisites.

Pedagogy

  • This module is structured into 6 learning modules, based on the 7 stages of the AIAG-VDA approach, followed by a module for assessing the learner’s knowledge.

  • Each module involves the learner in interactive activities, integrating new knowledge and identifying pitfalls to avoid.

Evaluation mode

  • Achievement test.

For more information on accessibility, access procedures and deadlines, see our Training page.

Programme

  1. Module 1: Introduction
  2. Module 2: Stage 1 – Planning & Preparation
  3. Module 3: Stages 2 & 3 – Structural & functional analyses
  4.  Module 4: Stage 4 – Failure analysis
  5. Module 5: Step 5 – Risk analysis
  6.  Module 6: Steps 6&7 – Optimisation & Documentation
  7. Knowledge test
About Instructor
Valérie LE COUËDIC
Speciality: EURO-SYMBIOSE consultant since 2001, Valérie masters both automotive and aeronautical standards. Technical contact for the VDA-QMC.
Duration
1 hour
Validation
Examination of training achievements and delivery of a certificate of success

To get a quote : Contact us